Good preparation is important for any remodeling job, and with art, it is very true. When working with concrete, it can be even more important, the application of paint properly maintain and will not cause problems later. Preparation is a bit boring, and for those who may be impatient time work in order to rush through them, but you will regret it later when you are not careful about the details. This article will describe some of the most important steps when it comes to preparingPainting your concrete surface.
Concrete floors are also sometimes left alone in peace, but in some areas you will want them done to look like in an upscale store, or even a covered area of laundry.
To start, ensure that your floor completely clean off all dirt, then return and / or vacuum it well. If necessary, clean all grease and contaminants with the appropriate cleaning solutions. To keep the color right, the concrete, you need to make it a bit rough,this is called etching. Be careful, well-ventilated areas, or at least, if have no protective respirators when no ventilation. Also gloves and masks. The material for the etching is non-corrosive and corrosive. It is a hydrochloric acid and water mixture of 3 parts water, 1 part acid. Scrub the floor with this solution. Leave it until it stops bubbling, then rinse it completely with clean water. Remove all puddles and allow to dry. It should dry in a fewHours, if not, rinse it again very good and wait for completely dry.
Now you can paint your concrete. If the image is complete and it is dry, you can apply your concrete sealer to make it fresh and increase the longevity and durability.
0 ความคิดเห็น:
แสดงความคิดเห็น